1. Scope of application
This Installation Manual is suit for the 16F Fiber Access Point, as the guidance of proper installation. The scope of application is: aerial, wall and pole mounting. The ambient temperature ranges from -40 to 65℃.
2.Applicable temperature
● -1~+45℃(Temperature for operation)
● -50~+70℃(Temperature for storage and transportation)
● -40~+65℃(The ambient temperature ranges )
3. Installing and fixing the cable
3.1 Installing and fixing the straight through cable. See below figure.




3.2 Installing and fixing the branch cable for the 16F Fiber Access Point. See below figures


4. Install the splitter and adapter module according to the following figure.


5. Drop cable installation and fixing


6. Occording to the operation requirements of splicing machine, splicing,
coiled and fixed on the optical fiber

7. If install pre-connected cable, by changing the end of fixed module two.

8. Pole mounting: Use the hose clamp to fix it on the pole. See below Figure.

9. Wall mounting: Use the expansion screws to fix 16F Fiber Access Point on the wall. See below figure
